Mandrini di serraggio ZAS – in alluminio ad alta resistenza

Pin-jaw chuck ZAS

The Maprox pin-jaw chuck: A modern classic providing the greatest possible probe freedom, due to the minimized workpiece contact areas – high above the chuck, especially made for sensitive rings and shafts | Chuck made of aluminum, Altef®-coated (corrosion protected, see Gtd) Including 6 pin-jaws or alternatively a combination of 3 pure seating pin-jaws plus 3 pin-jaws without taps | All base and pin-jaws corrosion protected, see Gtd

Pin-jaw chuck ZAS – 6 pin-jaws with contact area (taps)

Pin-jaw chuck ZAS – 6 pin-jaws with contact area (taps)

Type | Item no.

  • 6 ZAS 80 | 195467.00
  • 6 ZAS 160 | 195442.00
  • 6 ZAS 240 | 195466.00 (foto di sopra)

Pin-jaw chuck – 3 seating pins and 3 pin-jaws with taps

Pin-jaw chuck – 3 seating pins and 3 pin-jaws with taps

Type | Item no.

  • 6 ZAS 240 | 195457.00

Pin-jaw chuck – Dimensions

Pin-jaw chuck – Dimensions

We reserve the right to effect technical modifications and to vary the design.

Pin-jaw with contact area (taps)

Pin-jaw with contact area (taps)

Type | Item no.

  • 1 Pin-jaw ZAS 240 | 196059.00

Seating pin and pin-jaw (without taps)

Seating pin and pin-jaw (without taps)

Type | Item no.

  • 6 ZAS 240 – Pin-jaw (without taps, Reinox) | 195458.00
  • 6 ZAS 240 – 1 seating pin (without taps, Reinox) | 195459.00

Set of base jaws

Set of base jaws

Type | Item no | Amount of bore holes

  • 3/6ZAG80 | 196085.00 | 2
  • 3/6ZAG160 | 195118.00 | 4
  • 3/6ZAG240 | 196035.06 | 4

Maprox AG
Bolstrasse 7
CH-8620 Wetzikon

info@maprox.ch
Tel. +41 (0)43 488 18 00
Fax. +41 (0)43 488 18 08

©2019 Maprox AG

Attrezzi di serraggio · Costruzione apparecchi · Progetti

CG & informazione legale | Protezione dei dati

All rights reserved